SPEC SHEET

LED System

• Proprietary linear LED module incorporates premium LEDs on a robust platform to achieve
  excellent thermal management. LEDs are placed to promote a uniform appearance. Available
  in 2700K, 3000K, 3500K or 4000K with CRI>80 or CRI>90, 3 SDCM. 3500K and 4000K with
  CRI>90 have a cyanosis observation index (COI) of 3.3 or less. LED modules and drivers are
  replaceable from below.

Construction

• Extruded aluminum housing.
• Cast aluminum end caps. 8’ unit weight: 25lbs.

Optic

• Reflectors fabricated of 22 Ga. steel finished in matte white powder coat.
• Extruded acrylic lens with satin finish, up to 8' continuous.

Electrical

• Luminaires are pre–wired with factory installed branch circuit wiring and over-molded
  quick connects. Standard 120-277V constant current driver includes 0-10V analog
  dimming. Power factor > .9. PoE compatible: Integrates with Power over Ethernet lighting
  systems via standard, low-voltage wires. PoE runs require an independent PoE node and
  power feed for each luminaire section.

Emergency

• Emergency Battery output - 10 watts for 90 minutes.
• Maximum mounting height: 20 ft.

Labels

• UL and cUL listed.
• Suitable for Dry or Damp Locations, indoor use only.

Finish

• Polyester powder coat applied over a multi-stage pre–treatment.
• Canopy and cord white as
  standard.

Lumen Maintenance

• Reported:
  • L70 at >61,000 hours
  • L90 at >61,000 hours
• Calculated:
  • L70 at 385,000 hours
  • L90 at 103,000 hours
• Derived from EPA TM-21 calculator.
• Based on typical conditions, consult factory for additional data.